Intelligent Purification Non-Contact Compensating AC Regulator Zsbw-10

• Current Type: AC
• Phase: Three Phase
• Frequency Characteristics: High Frequency
• Usage: Zsbw
• Frequency: Industrial Frequency
• Size: Large
• Model NO.: Zsbw-10
• Iron Core Shape: Ring
• Power Source: Linear Regulated Power Supply
• Brand: Wenlida
• Transport Package: Wooden Case
• Trademark: WENLIDA
• Origin: China
• HS Code: 85044019
• Production Capacity: 20000PCS/M

Product Description

PRODUCT INTRODUCTION:

ZDBW/ZSBW intelligent contactless compensation regulator can ensure stable output voltage when the voltage fluctuation of external power supply network and load change.
This product is compared with other forms of power regulator with wide range, high precision, high efficiency, no distortion, stable voltage regulation, strong control function, widely applied load, can withstand transient overload, long-term continuous operation, with overvoltage and undervoltage, over-current protection function, as well as small volume and light weight. Convenient installation, reliable operation and so on.

MAIN COMPONENTS AND PANEL INDICATOR :




MODEL MEANING DESCRIPTION:


 

MAIN TECHICAL SPECIFICATION OF NON-CONTACT INDUSTRIAL VOLTAGE STABILIZER

input	Range	Three phase five wire 380V ± 15% (wider range can be customized)
	frequency	50/60HZ
transport Out	Rated voltage	Three phase 380V
	Voltage stabilizing accuracy	±2%
	response speed	<10ms
	Additional voltage harmonic THD	No additional waveform distortion (static)
	Efficiency	≥98%
	Three phase unbalance	Three phase voltage automatic balance
	Delay output	Stabilize voltage before output (protect equipment from impact)
protect	Over voltage	When the output phase voltage exceeds 10%, it can be set to cut off the output or uninterrupted transferring to the  bypass or no action,can be set
	Under voltage	When the output phase voltage is lower than 10%, it can be set to cut off the output or uninterrupted transferring to the  bypass or no action, can be set
	Lack of phase	automatic cut-off
	Phase sequence error	Yes, digital phase detection technology is adopted, which is accurate and reliable, and can effectively avoid misoperation caused by harmonic interference
	overload	Electronic detection, output can be cut off within 3 minutes of overload or uninterrupted transferred to the bypass, can be set
	Over current	Electronic detection and circuit breaker fulfill dual protection
	short circuit	Electronic detection and circuit breaker fulfill dual protection
	bypass	Uninterrupted automatic bypass
Display	Voltage	A,B,C,ΣABC three phases have true RMS touch screen display respectively
	electric current	A,B,C,ΣABC three phases have true RMS touch screen display respectively
	working condition	Voltage stabilizing state / mains state
	abnormal	Overvoltage, undervoltage, overload, fuse failure, phase loss and phase dislocation
operation mode		It has two working modes: voltage stabilization and mains power
Overload capacity		1.2Times the rated current for 30 minutes
interface		The intelligent man-machine interface operation panel is convenient for setting and querying various parameters

 Performance characteristics

Fast response	12Bit high-speed AD acquisition, 128 wave acquisition points per cycle, digital processing and operation by single chip microcomputer, and rapid compensation by electronic module
Multiple adjustment modes can be set	Simultaneous regulation: when simultaneous regulation is set, AD simultaneously collects the true effective values of three-phase voltages a, B and C for average calculation, and gives instructions for compensation, which can effectively improve the imbalance of three-phase voltage
	Individual regulation: when individual regulation is set, the three-phase voltages are adjusted respectively to ensure that the three-phase voltages are within the accuracy range, especially suitable for single-phase load
	Automatic judgment: microcomputer automatic analysis should carry out simultaneous or individual regulation.
Advanced measurement technology	12Bit AD acquisition, digital filtering and true RMS calculation by single chip microcomputer
Accurate control	Perfect cooperation between large-scale programmable logic device and single chip microcomputer
Humanized Interface	Various indicators (output voltage, voltage stabilizing accuracy and protection function) can be set through the touch keys on the operation panel
No distortion of output waveform	Contactless zero crossing switch switching, same frequency, phase locking and sine wave superposition compensation principle
Resistance to harmonic interference	True RMS voltage detection
Wide load range	Resistive, capacitive and inductive loads can be adapted
Slow start and impact resistance	voltage stabilization first before output
Full protection function	In case of overvoltage and undervoltage, it can be protected within 1s or automatically switched to bypass without interruption, and has perfect phase loss, overload, short-circuit protection and sound alarm function after fault
Voltage and current display	The true RMS values of voltage and current are displayed on the touch screen

Component brand

Device name	Manufacturer	Device name	Manufacturer
Thyristor	IR chip domestic packaging	air switch	Chint
transformer	High quality silicon steel sheet is adopted	Control chip	ARM

EXTERNAL DIMENSION WEIGHT:



COMPANY PROFILE:

Shanghai Wenlida Electric Co., Ltd (hereinafter "Wenlida") is the largest manufacture base in China, the drafter of the national information industry standard, and the famous provider of voltage stabilizer.

Wenlida has more than ten-year's glorious history. Since it established in 1990, Beijing, Guangzhou, Changchun, Chongqing, Chengdu, Qingdao, Jinan and Suzhou office come into existence successively. In 2009, two new standard workshops and R&D center are established in Shanghai Jiading (37000m2) and Zhejiang Jiashan (45000m2) respectively.

Wenlida has gained public praise for its advanced technology, excellent products, stable quality and first class service. Experienced in research and technology, system design, manufacture craft and products quality has made Wenlida famous in the power supply industry. In 1998, 2005 and 2007, Wenlida becomes the appointed supplier of Haier, ZTE and Huawei respectively. Also, it is the qualified supplier of MITSUBISHI,HITACHI,SIEMENS,DOOSAN,MGE,Hisense and OMRON.

Nowadays, Wenlida is applying itself to the research and manufacture of clean energy, environment protection, energy saving, safety guard products. Based on the "specialized voltage stabilizer", "transformer" and "harmonic active filters", Wenlida will try to become the mordern designer and manufacturer of new power supply.