200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter
Contact Supplier
Product Highlights
- Dynamic Harmonic Filtering: Suppresses harmonics from 2nd to 50th order with THDi < 3% using DSP calculation and IGBT technology.
- Reactive Power Compensation: Adjusts power factor from -100% to +100% to ensure load balance and equipment safety.
- Ultra-Fast Response Time: Instantaneous response under 100 microseconds and total compensation within 10 milliseconds.
- Flexible Customization: Offers full customization, minor customization, and flexible options based on samples or designs.
- Multi-Mode Support: Supports both three-phase three-wire and three-phase four-wire systems for diverse industrial applications.
- Advanced Communication: Features RS485, network port, and Modbus protocol with 10-channel TSC interface for centralized monitoring.
- High Reliability: Includes over-voltage, under-voltage, short circuit, and reverse protection with 100% final inspection.
- Wide Voltage Range: Operates at 380V (-40% to +40%) and 690V (-20% to +20%) with 50/60Hz frequency tolerance.
Product Attributes
- Customization
- Available
- Certification
- CCC, SGS
- Working Voltage
- 380V(-40%~+40%) ; 690V(-20%~+20%)
- Working Frequency
- 50/60Hz±5Hz
- Circuit Topology
- Three Level
- Number of Parallel Units
- up to 12
- Filtering Range
- 2-50 Times
- Overall Filtering Capability
- Thdi(Total Distortion Rate of Harmonic Current)<3%
- Reactive Power Compensation
- -100%~+100%(Power Factor Can Be Set)
- Instantaneous Response Time
- <100us
- Total Response Time
- <10ms
- Expand Function
- 10 Channel Tsc Interface
- Communication Interface
- RS485 Network Port
- Display Interface
- 3 / 7 Inch Touch Screen
- Transport Package
- Wooden
- Trademark
- wenlida
- Origin
- China
- HS Code
- 85044019
- Production Capacity
- 20000PCS/M
Product Images of 200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter
-
200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter -
200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter -
200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter -
200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter -
200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter -
200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter
Find Similar Products
Product Description
WT-APF active power filter (APF) is a new type of power electronic device used to dynamically suppress harmonics and compensate reactive power. It detects the load current with sampling circuit, extracts the harmonic component in the load current through internal DSP calculation, and drives IGBT, The control inverter generates a harmonic current which is equal to the harmonic current of the load and in the opposite direction and injects into the power grid to achieve the purpose of filtering. According to the same principle, APF can also compensate the negative sequence current component of asymmetric three-phase circuit, to realize the three-phase unbalance compensation and reactive power compensation.
Comprehensive functions: intelligent harmonic filtering, dynamic reactive power compensation and three-phase load balancing can be realized at the same time
Excellent performance: with nearly perfect harmonic filtering effect and continuous dynamic reactive power compensation, the power factor is increased to more than 0.95 to ensure load balance and safe operation of equipment
Advanced technology: continuous, dynamic tracking compensation, 40us response to load change, 10ms compensation. The filtering performance is not affected by the system impedance. The harmonic compensation characteristics are not affected by the frequency change of the power grid, and the compensation ability is not limited by the grid voltage.
MODEL DESCRIPTION:
SPECIFICATION SHEET:
| Three-phase Three-wire High Voltage APF | |||
| Type | Rated voltage (KV) |
Rated current (A) |
Installation mode |
| APF3L-6/100 | 6 | 100 | vertical |
| APF3L-6/200 | 6 | 200 | vertical |
| APF3L-6/300 | 6 | 300 | vertical |
| APF3L-6/400 | 6 | 400 | vertical |
| APF3L-6/500 | 6 | 500 | vertical |
| APF3L-6/600 | 6 | 600 | vertical |
| APF3L-10/200 | 10 | 200 | vertical |
| APF3L-10/400 | 10 | 400 | vertical |
| APF3L-10/800 | 10 | 800 | vertical |
| APF3L-35/200 | 35 | 200 | vertical |
| APF3L-35/400 | 35 | 400 | vertical |
| APF3L-35/800 | 35 | 800 | vertical |
| Wall mounted | ||||||||||
| type | width (mm) |
height (mm) |
depth (mm) |
mounting hole (mm) |
weight | |||||
| L | L1 | H | H1 | D | D1 | D2 | d | i | Kg | |
| 50A | 381 | 375 | 178 | 170 | 623 | 580 | 550 | 600 | 300 | 30 |
| 75A | 506 | 500 | 208 | 200 | 623 | 580 | 550 | 600 | 400 | 38 |
| 100A | 506 | 500 | 248 | 240 | 653 | 616 | 580 | 630 | 400 | 46 |
| 150A | 506 | 500 | 278 | 270 | 710 | 670 | 638 | 685 | 400 | 58 |
| Rack-mounted | ||||||||||
| type | width (mm) |
height (mm) |
depth (mm) |
mounting hole (mm) |
weight | |||||
| L | L1 | H | D | D1 | d | i | h1 | D2 | Kg | |
| 50A | 445 | 375 | 170 | 580 | 550 | 413 | 100 | 35 | 405 | 30 |
| 75A | 570 | 500 | 200 | 580 | 500 | 538 | 120 | 38.5 | 535 | 38 |
| 100A | 570 | 500 | 240 | 616 | 580 | 538 | 160 | 40 | 535 | 46 |
| 150A | 570 | 500 | 270 | 670 | 638 | 538 | 190 | 40 | 535 | 58 |
| Three-phase Three-wire Tri-level Three-leg APF | ||||||
| Type | Rated voltage (V) |
Rated current (A) |
Rated frequency (Hz) |
Dimension(mm) Width * depth * height |
weight (kg) |
Installation mode |
| APF3L-400/45 | 400 | 45 | 50/60 | 800*600*1500 | 140 | vertical |
| APF3L-400/60 | 400 | 60 | 50/60 | 800*600*1500 | 140 | vertical |
| APF3L-400/80 | 400 | 80 | 50/60 | 800*600*1800 | 180 | vertical |
| APF3L-400/100 | 400 | 100 | 50/60 | 800*600*1800 | 180 | vertical |
| APF3L-400/150 | 400 | 150 | 50/60 | 800*600*1800 | 250 | vertical |
| APF3L-400/200 | 400 | 200 | 50/60 | 800*600*2200 | 300 | vertical |
| APF3L-400/250 | 400 | 250 | 50/60 | 800*600*2200 | 300 | vertical |
| APF3L-400/300 | 400 | 300 | 50/60 | 900*600*2200 | 400 | vertical |
| APF3L-400/700 | 400 | 700 | 50/60 | 800*600*2200*3 | 400*3 | vertical |
| Three-phase Four-wire Tri-level Four-leg APF | ||||||
| Type | Rated voltage (V) |
Rated current (A) |
Rated frequency (Hz) |
Dimension(mm) Width * depth * height |
weight (kg) |
Installation mode |
| APF4L-400/45 | 400 | 20 | 50/60 | 800*600*1500 | 80 | vertical |
| APF4L-400/60 | 400 | 30 | 50/60 | 800*600*1500 | 90 | vertical |
| APF4L-400/80 | 400 | 45 | 50/60 | 800*600*1800 | 120 | vertical |
| APF4L-400/100 | 400 | 80 | 50/60 | 800*600*1800 | 220 | vertical |
| APF4L-400/150 | 400 | 100 | 50/60 | 800*600*1800 | 250 | vertical |
| APF4L-400/200 | 400 | 150 | 50/60 | 800*600*2200 | 250 | vertical |
| APF4L-400/250 | 400 | 200 | 50/60 | 800*600*2200 | 300 | vertical |
| APF4L-400/300 | 400 | 250 | 50/60 | 900*600*2200 | 300 | vertical |
| APF4L-400/700 | 400 | 700 | 50/60 | 800*600*2200*3 | 400*3 | vertical |
PRODUCT PARAMETERS:
| Working voltage | 380V(-40%~+40%) ; 690V(-20%~+20%) |
| Working frequency | 50/60Hz±5Hz |
| Wiring mode | Three-phase three-wire ; Three-phase four-wire |
| Current sampling | 5A(CT:100/5~10000/5) |
| Current sampling position | Load side / grid side optional |
| Circuit topology | Three level |
| Number of parallel units | Up to 12 |
| Switching frequency | 21.6KHz |
| Cooling mode | Intelligent air cooling |
TECHNICAL PERFORMANCE:
| Filtering range | 2-50 times |
| Selection of filtering times | 2 ~ 50 times optional |
| Single filter setting | 2 ~ 50 times optional (can be set) |
| Overall filtering capability | THDi(Total distortion rate of harmonic current)<3% |
| Reactive power compensation | -100%~+100%(Power factor can be set) |
| Three phase unbalance | support |
| overload protection | support |
| Instantaneous response time | <100us |
| Total response time | <10ms |
| Noise | <65dB |
| Protection function | Over voltage protection, under voltage protection, short circuit protection, inverter bridge reverse protection, etc |
COMMUNICATION MONITORING:
| Expand function | The 10 channel TSC interface can operate with TSC / TSF |
| Communication interface | RS485 Network port |
| Communication protocol | General agreement on electricity;modbus protocol;YCP/IP |
| Display interface | 3 / 7 Inch Touch Screen |
| Display information | Voltage, current, power, harmonic and other grid parameters |
| Monitor | Support independent monitoring / centralized monitoring of each module |
| Fault alarm | Up to 500 alarm messages can be recorded |
USAGE ENVIRONMENT:
| Ambient temperature | -20ºC~+45ºC |
| Storage temperature | -40ºC~+65ºC |
| Relative humidity | Maximum 95% frost free |
| Altitude | Below 1500m, the power will be reduced by 1% every 100m |
| Protection level | IP20,Higher protection level can be customized |
| Installation mode | Wall mount, rack, whole machine |
| Incoming line mode | Back feed, upper feed |
SCOPE OF APPLICATION:
W-APF3L is suitable for harmonic filtering of three-phase three wire industrial load (rated voltage is 380V, 660V, 690V, 1140V system), such as rectifier, frequency converter, large UPS, intermediate frequency furnace, electric arc furnace and other nonlinear loads
W-APF4L is suitable for harmonic filtering of three-phase four wire (rated voltage 380V / 220V), such as lighting equipment of commercial office building, computer, UPS, elevator, frequency conversion air conditioning and other nonlinear loads. It is suitable for harmonic filtering of primary and secondary harmonic current generated by neutral line of nonlinear load.
About the Supplier
This supplier has been audited by TÜV Rheinland. Verify the report on the official TÜV Rheinland website with ID "MIC-ASR244202". Items marked "
" are certified.
){kind=link}
Company Profile
Shanghai Wenlida Technology Co., Ltd. is a modern enterprise founded in 1995, which set in the integration of R&D, production and sales on Regulated Power Supply, EPS Emergency Power Supply and Harmonic Suppressor. With more than 25 years' development, the company has become a renowned top manufacturer in this industry.
WENLIDA has scaled up these years by specialization. The company always focuses on the R&D and production of multi-industry and series of Regulated Power Supply, Frequency Power Supply, Harmonic Suppressor and Reactive Compensation Capacitor Device. At present, the series of professional products in Wenlida Electric Co., Ltd are widely applied in the radio and TV networks, telecommunications, IT, medical, machinery manufacturing, smelting, textiles, printing, commutating, chemicals, rail, energy, and urban electric power etc. Furthermore, the company has become a reliable supplier of many well-known enterprises such as Huawei, MGE, Ke-hua, and Mitsubishi Heavy Industries, etc. The products have been sold abroad to Nigeria, Cuba, Pakistan, Iran and South Korea, etc.
Shanghai Wenlida Technology Co., Ltd. Has gained lots of respect by its powerful strength and professional service. WENLIDA presently possesses the largest stabilizer production base and the ancillary professional testing and supporting production line. Meanwhile, the R&D and production teams with highly educated and experienced employees impel the development of the company. Branch companies and offices cover the city of Beijing, Harbin, Changchun, Shenyang, Jinan, Qingdao, Chongqing, Guangzhou, Shenzhen, Guizhou, Fuzhou, Xi'an, Wuhan, and Taiyuan, etc., which provides more appropriate network timely service and technical support.
High quality and standardization attracts more and more customers. The quality control system of the company has obtained ISO9002 (94) and ISO9001 (2000) and TLC. Wenlida Electric Co., Ltd has gained the entry-net permit for telecom equipments from Ministry of Information Industry and for broadcasting equipments from National Radio and TV Bureau. Outstanding technical superiority makes Wenlida the sponsor and drafter of standard of "Contactless compensating AC stabilizer" by Ministry of Information Industry.
As responds to the < Enforcement Regulations for Speeding up Vitalizing Machine Building Industry Issued by the State Council>, the company now aims to the strategy of strengthening and enlarging the main industry and extend to the related ones so as to build up a large enterprise group. The products expand to automatic doors, automatic control systems and complete plant processing. Then with more product lines and dramatically increased production could the company return the love of customers and community.
The company will insist on taking the quality principle of winning customer with high quality products and services, innovating and enterprising, exceeding and perfecting, in this way, to maintain and increase the customers' capital with high quality so as to realize mutual beneficial win-win situation.
About Our Factory & Business Background
-
Business Type
- Manufacturer/Factory & Trading Company
- Address
- No. 2439, Gaoshi Road, Jiading District, Shanghai, China
-
Plant Area
- 15000 square meters
-
Number of Employees
- 38
-
Registered Capital
- 50,000,000 RMB
-
Terms of Payment
- LC, T/T, D/P, PayPal, Western Union, Small-amount payment
-
International Commercial Terms(Incoterms)
- FOB, CIF, CFR, EXW
-
Average Lead Time
-
Peak Season Lead Time: one month
Off Season Lead Time: one month -
Nearest Port
- Shanghai Port
-
Minimum Order Quantity
- 1
-
Supply Chain Partners
- 10
Our Production Capability & Technical Expertise
-
Main Products
- Automatic Voltage Regulator; Transformer; Laiminated Busbar; Variable Frequency Power; APF
-
Production Lines
- 5
-
Production Machines
- Assembly Line
-
QA/QC inspectors
- 2 people
-
Inspection Type for Finished Products
- 100% inspection(Function inspection)
-
Inspection Method for Finished Products
- Have instructions and uniformly followed
-
Customization Options
- Customization from Samples, Customization from Designs, Full Customization, Minor Customization, Flexible customization
-
ODM Service Available
- Yes
-
OEM Service Available
- Yes
-
R&D Engineers
- 5 people
-
Traceability of Raw Materials
- Yes
-
Own Brand
- Yes
Our Industry Experience & Global Business Record
-
Year of Establishment
- 2011-09-08
-
Export Year
- 13 Years
-
Main Markets
- Europe, Africa, Domestic
-
Repeat Buyers Choice
- 50%~80%
-
Number of Foreign Trading Staff
- 2
-
Overseas Agent/Branch
- No
-
New Products Launched in Last year
- No
Our Certifications, Standards & Industry Recognition
-
Cooperated with Fortune 500
- No
FAQ
- What is the filtering range of the device?
- The device filters harmonics from the 2nd to the 50th order, with selectable filtering times.
- How fast is the response time?
- It offers an instantaneous response time of less than 100 microseconds and a total response time under 10 milliseconds.
- Can the power factor be adjusted?
- Yes, reactive power compensation ranges from -100% to +100%, allowing the power factor to be set as needed.
- Is customization available for this product?
- Yes, we offer full customization, minor customization, and flexible customization based on samples or designs.
- What communication protocols are supported?
- The device supports RS485, network ports, and protocols including Modbus and YCP/IP.
- How many parallel units can be connected?
- Up to 12 parallel units can be connected to expand the system capacity.
- What is the total harmonic distortion rate?
- The overall filtering capability ensures the Total Distortion Rate of Harmonic Current (THDi) is less than 3%.
Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- THE QUALITY OF ENERGY
- Active power filter APF
- 200A Three-Phase Three-Wire Low Voltage Harmonic Filtering Device with IGBT and Monitor for Tyre Plant Apf Active Power Filter
Related Categories
Hot Searches
- China Power Factories
- Wall Power Factories
- Active Component Factories
- Power Monitor
- Active Power
- Wall Mounted Power Battery
- Wall Mounted Box
- Wall Mounted Boxes
- Power Igbt
- Top 10 Power
- Wall Mounted Bulkbuy